1 4

Roam 2 Front and Rear Fender Kit For MTBs

Roam 2 Front and Rear Fender Kit For MTBs

Rs. 2,499.00
Rs. 2,499.00
Sale Sold out
Tax included. Shipping calculated at checkout.

Looking for a full-coverage MTB mudguard kit for your hardtail? The NAC Roam 2 is a front and rear fender kit cut deliberately wider than a road guard, so it catches the side-spray and flying debris that slim fenders throw straight past. Indian trails turn to mud the moment the monsoon arrives, and a narrow fender protects a narrow strip — your fork stanchions, your drivetrain, your back and your face take the rest. The Roam 2 is sized for MTB tyres up to 3 inches and built to stay silent and centred through technical descents.

Best For

Hardtail mountain bikes ridden through monsoon season, wet trails, and muddy dirt tracks. The Roam 2 is not designed for full-suspension frames — the rear shock and linkage leave no room for the rear fender to mount correctly. If you ride full-suspension, the NAC D-Fender pack is the kit that fits.

Key Features

  • Ultra-wide blade profile — sized for MTB tyres up to 3 inches, with extended lateral coverage that catches the side-spray slimmer fenders miss entirely.
  • Front and rear coverage — shields your fork, drivetrain, back, and face rather than protecting one end of the bike and leaving the other exposed.
  • Reinforced adjustable stays — high-tension mounting points hold both guards silent and centred over rocky terrain, so there's no fender rattle on descents.
  • Red-crown micro-adjustment — set the tyre clearance yourself for a rub-free fit on your exact tyre width, rather than living with whatever the mounts give you.
  • Protects your fork internals — keeping grit off the stanchions and seals is what delays an expensive fork service, and the front guard is doing that on every wet ride.
  • Built for Indian conditions — monsoon mud, wet trails, and dry-season dust all handled by the same kit.
  • Hardtail fitment — engineered specifically for hardtail MTB frames.

Fitment

  • Frame: hardtail MTBs only — not suitable for full-suspension
  • Tyre width: up to 3 inches
  • Coverage: front and rear fenders included
  • Clearance: adjustable via the red-crown system

Installation

Clean and dry the fork legs and seat stays before you fit the rubber pads — a pad that never bonded properly is the usual cause of a rattle weeks later. Fasten the supports, then use the red-crown adjusters to set the gap between tyre and fender. Leave at least 15mm: any closer and wet mud packs into the gap and starts rubbing, which is the single most common fitting mistake on a wide-profile guard.

Ride the wet season without wearing it. Free shipping on prepaid orders above ₹999.

Keep the mud off your frame too — pair this with the NAC Chain Stay Protector.

In case you have any queries, reach out to us on WhatsApp at +91 99875 97589

Shipping, Returns and Warranty

Shipping

Order is usually dispatched in 1-2 days of placing the order, Delivery can take between 3-7 days depending on the delivery location. You can easily track the order by viewing the link that is shared with you after placing the order.

Warranty

The warranty period for this product is 6 Months from the date of delivery. If your product is still under warranty, we will replace or repair your product depending on its condition, write to us at support@thenacstore.com or WhatsApp us at +91 99875 97589 to register a claim by sending us a video of the damaged or defective product along with the proof of purchase. After reviewing the images and videos we will get back to you as soon as possible with a resolution. To learn more you can view our warranty policy.

Returns

We have a 15-day return policy, which means you have 15 days after the date of delivery of your order to request for a return. To be eligible for a return, your item must be in the same condition as you received it, it should be unused with no damage, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at support@thenacstore.com or +91 99875 97589. If your return is approved after viewing the images and videos sent by you, we will arrange for a return, as well send instructions on how to pack your product and when the pick up will take place. Items sent back to us without first requesting a return will not be accepted. After receiving the product at our warehouse we will inspect the product. On approval of inspection we will begin the refund process. 

  • Damages and issues: Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
  • Exceptions / non-returnable items: Certain types of items cannot be returned, like, custom products (such as special orders or personalized items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. 
  • Refunds: We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund  .

Have any queries? You can always contact us by writing to us at support@thenacstore.com or WhatsApp us at +91 99875 97589

To learn more you can view our return policy

View full details

Frequently Asked Questions

Will the Roam 2 fit my mountain bike?
It is designed for hardtail mountain bikes. It is not made for full-suspension frames, where the rear shock and linkage leave no room for the rear fender to mount correctly. Check which you have before ordering.
What tyre widths does it clear?
Up to 3 inches. The blade is deliberately wider than a road fender so it catches the side-spray that slimmer guards throw straight past, which is the whole point on a mountain bike.
How much clearance should I leave above the tyre?
At least 15mm. Use the red-crown adjusters to set it. Any closer and wet mud packs into the gap and starts rubbing; this is the single most common fitting mistake.
Will it rattle on rough trails?
Not if it is set up properly. The reinforced stays and high-tension mounting points are what keep it silent. Make sure the fork and seat stays are clean and dry before you fit the rubber pads, because a pad that never bonded fully is usually what starts a rattle.
Can I use it on a road or gravel bike?
It will physically mount, but the blade is cut wide for MTB tyres and looks oversized on narrow rubber. For road and gravel bikes the Blade TXC kit is the right width and sits much closer to the tyre.