How to Install the D-Fender Enduro Fender

• For the front fender, place the fender between the front fork and tyre as shown in the video
• Start by fastening the zip ties from the fork bridge and then move towards the side
• Cut the excess of the ziptie
  
• For the rear fender, fold and fit the fender between the seat stays
• Fasten the zip ties and cut the excess

Things to keep in mind during Installation 

• Ensure that the zip ties are facing the right direction before installation
• Frame is clean before installation
• There is enough clearance for the wheel to move freely
• This fender might not be suitable with v break setup