Steps for installation

1. Unscrew the bottle holder bolts
2. Pass the strap through the C2 Strap Mount
3. Install your bottle holder on the C2 Strap Mount using the shorter bolts that are included to install
4. Align the C2 mount on the bottle cage holes and tighten both the bolts
5. Use the smaller inner loop to stash all your essentials, Start by adding the multi tool and Co2 Cartridges using the elastic loops then place the tube on top of them, use the velcro to tighten the tube in place
6. Place the essentials on the C2 mount and secure it by strapping it tightly
7. You can also add your mini pump to the loadout by using the pump strap

Things to keep in mind during Installation 

1. Use shorter bolts for mounting the bottle cage to the C2 and ensure that the bolds are not rubbing against your frame
2. Use included rubber feet in case you find that the C2 is too close to the frame and may damage it
3. The outer strap might not be able to move after installation, hence position it properly before installation 
4. Do not over tighten the bolts
5. Install the pump mount before installing the C2 to the frame