Steps for installation

1. Unscrew the bottle holder bolts
2. Pass the strap through the C1 Strap Mount
3. Align the C1 mount on the bottle cage holes and tighten both the bolts
4. Use the smaller inner loop to stash all your essentials, Start by adding the multi tool and Co2 Cartridges using the elastic loops then place the tube on top of them, use the velcro to tighten the tube in place
5. Place the essentials on the C1 mount and secure it by strapping it tightly
6. You can also add your mini pump to the loadout

Things to keep in mind during Installation 

• Use included rubber feet in case you find that the C1 is too close to the frame and may damage it
• The outer strap might not be able to move after installation, hence position it properly before installation 
• Do not over tighten the bolts